Thread: 3 Axis CNC router
Threaded View
-
05-06-2017 #11
Last Activity: 03-01-2025
I've got the shield from the cable from the drive (at the terminal end) soldered to an earth cable which goes back to the star and the cable that comes in from the stepper (at the terminal end) has the shield soldered to an earth cable that also goes to the star earth. Again don't know if its correct but works for me so far...
Sent from my HUAWEI VNS-L31 using Tapatalk
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 24 users browsing this thread. (0 members and 24 guests)
Similar Threads
-
BUILD LOG: 3 Axis Router
By GTJim in forum DIY Router Build LogsReplies: 8Last Post: 22-06-2020, 08:49 AM -
3-Axis CNC Router - For Helices.
By Dalmango in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 08-02-2014, 07:27 PM -
BUILD LOG: Wobbly: my first 3-axis router
By Sodster68 in forum DIY Router Build LogsReplies: 8Last Post: 20-01-2013, 10:28 AM -
3 axis cnc/router bed
By dudz in forum Marketplace DiscussionReplies: 23Last Post: 28-12-2012, 09:38 PM -
Need 6' x 4' bed, 4 axis router design.. Help..!
By fasteddy in forum Gantry/Router Machines & BuildingReplies: 29Last Post: 17-09-2010, 12:56 PM
Bookmarks