Thread: Sieg SX2 Plus build
-
10-06-2015 #41
Many Thanks for this Russell; I have one of these as a gift - long story. This is exactly what I need, but two questions: Roughly, what isthe Max height dimensions with the Z conversion fitted; and what stepper are you using to drive it.
Rob C
-
22-06-2015 #42
Total height with head in highest position is 1.07 m. I can't remember the model number of the stepper motors but they are NMEA23 size and about 80 mm long.
Russell.
-
23-06-2015 #43
Thanks,
I have enough headroom and I have Nema 24 motors 425 oz-in; I have done the screws and fitted the thrust bearings. Also have the acetal and the the Acme tap is on it way from china (20 quid). Will post when I have completed the nuts and mounted the X/Y motors and tested.
RC
-
14-09-2015 #44
Hi Russel,
I am getting ready to convert my Z and really like your design. I would like to make mine the same way.
Is there any chance that you can email me or upload the ball nut assembly dxf again? I clicked the link but it appears it is no longer valid.
Thank you, and again nice work setuo!
Dave
-
19-10-2015 #45
Hi Dave,
New link for ball nut assembly drawing: https://dl.dropboxusercontent.com/u/...llnut_assy.dxf
Not sure what happened with the old one.
Russell.
-
21-12-2019 #46
-
21-12-2019 #47
I've replied via email.
Russell
-
21-12-2019 #48
This Mega link might work:
https://mega.nz/#!uxVEmAjB!T_WqMIzQB...3zM3BP5hGmeSTk
Russell
Edit: local copy of the file can be found here:ballnut_assy.dxfLast edited by Lee Roberts; 17-10-2022 at 09:53 AM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Sieg - KX1
By ptjw7uk in forum Milling Machines, Builds & ConversionsReplies: 5Last Post: 31-07-2016, 11:25 AM -
FOR SALE: Sieg x3
By andris in forum Items For SaleReplies: 4Last Post: 25-02-2014, 06:32 PM -
Sieg KX3
By gently in forum Milling Machines, Builds & ConversionsReplies: 1Last Post: 10-09-2011, 11:42 AM -
Sieg X3 backlash...
By Vikash in forum General DiscussionReplies: 0Last Post: 20-10-2010, 02:51 PM -
Sieg SX2 in the UK?
By TheChunk in forum Milling Machines, Builds & ConversionsReplies: 4Last Post: 13-09-2010, 03:00 PM
Bookmarks