Sieg SX2 Plus build

[russell]

Sorry, I don't know what happened but for some reason a load of files have gone from my dropbox. Here they are again:
z-axis%20plan.dxf
Leadscrew_nuts.dxf
leadscrew%20support%20modified.dxf

Hope that works. Let me know if you have any problems.

Russell.

[casperro]

Many Thanks for this Russell; I have one of these as a gift - long story. This is exactly what I need, but two questions: Roughly, what isthe Max height dimensions with the Z conversion fitted; and what stepper are you using to drive it.

Rob C

[russell]

Total height with head in highest position is 1.07 m. I can't remember the model number of the stepper motors but they are NMEA23 size and about 80 mm long.

Russell.

[casperro]

Thanks,

I have enough headroom and I have Nema 24 motors 425 oz-in; I have done the screws and fitted the thrust bearings. Also have the acetal and the the Acme tap is on it way from china (20 quid). Will post when I have completed the nuts and mounted the X/Y motors and tested.

RC