New CNC Mill on the horizon

[fvfdrums]

The problem I have with that and the reason I wanted the one belt is mainly because if the long belt snaps the short one will still be driving one axis.

I'd have just slaved them otherwise :/

[JAZZCNC]

The problem I have with that and the reason I wanted the one belt is mainly because if the long belt snaps the short one will still be driving one axis.

I'd have just slaved them otherwise :/

Not a problem either just put a sensor on longer belt which is tied into E-stop so if it snaps machine stops.!! . . . . I did this with my machine just because I leave it unattended for long periods.