Quote Originally Posted by fvfdrums View Post
Finally..... The relay outputs from the csmio - to control the spindle forward control from Mach should it just be wired from DCM on huanyang inv to pin 25 and pin 12 to For? That's for relay output 4 I'm hoping? I've got the analog hooked up fine just can't get it to switch on. I've set the parameters as well so it's not manual control pd001&2 I think (not in front of the machine right now)
Yes wiring correct but you need to go into ports & pins and spindle setup then Spindle control and check the disable Relays box and set M3 to output #4.