New CNC Mill on the horizon

[JAZZCNC]

Wood is easy just get a good vacuum on the job and it's sorted.! . . . BUT Aluminium is another story.!!!

Air works good for clearing but it blasts those little buggers all over the place. Fogger or Mister will choke you to death unless machines enclosed so I'd forget typical fogger system. What You need is Odour-Less Fogger that spits little droplets at the work and doesn't create mist, this works good.

BUT I'll warn you coolant (or indeed Air) don't mix well with wood. Coolant turns wood dust into very abrasive paste that is a twat to clean and wears machine like crazy.
If your planning on cutting wood and Ali then I'd stick with air for cutting Ali and don't use coolant.