Quote Originally Posted by craigrobbo View Post
Hi there.
Sorry for the late reply.

Stepmores seem quite honest in their prices, Not sure why $115 in shipping though as I was only charged $15!
Speak to a gentlman called Eric (tell him I put you onto him please)
The Steel sink/Tub if you haggle you can get for free, I did.

The Z axis I would leave be, More travel = more flex and only get the 75mm IF YOU NEED IT.

I think the weakest point of the machine is the Y rails, If you can afford the extra, upgrade to supported rails (ignore anything he pawns onto you, just get them)

As for electronics, i am not too clued up on this sorry, I have no idea if they are 23's But I do know the Y axis motor is twice the size of the other 2?

Thanks

Craig
Craig hi

Eric said that now he puts SBR20 on Y axis in 3040m machines.
Do you still think that the 75 mm axis will be flexible anyway after this change?

I seriously want to buy one , I only need to decide about this option.
The other option I am thinking of, is the 4th axis but if I leave the Z as it is, the 4th axis becomes useless. Thank you in advance.