. .

Thread: Peak or RMS

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 04-09-2012 #1
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by blackburn mark View Post
    the only disadvantage is they maintain power to the motors when i hit the "reset" where as the TB cut all power so i will have to do a bit of faffing when plugging the 4th axis motor in
    Are you using the enable pins.? If so then don't and think you'll find it drops the power.?
    Reply With Quote Reply With Quote
  2. 04-09-2012 #2
    blackburn mark's Avatar
    Lives in blackburn, United Kingdom.
    blackburn mark
    Last Activity: 24-03-2022 Has been a member for 9-10 years. Has a total post count of 604. Received thanks 28 times, giving thanks to others 28 times.
    Quote Originally Posted by JAZZCNC View Post
    Are you using the enable pins.? If so then don't and think you'll find it drops the power.?
    i read your post about enable pins... iv not attached any jazz.... av i busted it already?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: Ay-up from the sunny peak district!
    By beado4ever in forum New Member Introductions
    Replies: 2
    Last Post: 01-10-2009, 10:24 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules