Chinese Spindles

[i2i]

there is also a model with a cam to operate the atc fitted to the top of the spindle which will allow a direct drive motor, i'll see if i can find the link.

[JAZZCNC]

Can anybody read chinese.? I would really like to know what this says and motor spec.
http://www.aliexpress.com/fm-store/9...200W-400W.html

I think I'm reading it for the 400W motor has.
60V
8.4A
1.27Nm continous
3.82 peak
3000rpm

At £170 for motor and drive this is cheap and not worth messing with steppers. Don't think it includes encoder like but still I'm sure they will be on there some where cheap enough.?

Edit: Maybe it does include encoders becasue I'm sure the bit say 2500(chinese squigle) means 2500ppr the squigle bit I hope means x 4 for quadriture so 10,000PPR encoders.?

[Ricardoco]

there is also a model with a cam to operate the atc fitted to the top of the spindle which will allow a direct drive motor, i'll see if i can find the link.

again that sounds like just the job

[Ricardoco]

again that sounds like just the job

OMG £650 Delivered!!!!! thats music to my ears...