Chinese Spindles

[Ricardoco]

I'm looking at at least one maybe two of these BT30 atc spindles, so when you're looking at getting yours let me know. A better search may provide a better or cheaper product so don't rush into this one.
I also looked at the spindle with the motor, but i need to use 6k or less for mill use.

Your wish is my command we will keep looking, i didnt see the spindle with motor...

[Ricardoco]

i know its a bit off topic but what alternatives would you consider to ballscrews on a 6' or 8' setup,


WOW just got a saturday delivery of the bits ive been waiting for...

6x 400x400x40 ali plate
10x 2400x100x50x3 steel box section.
6x 100x400x6 steel plate

Today is looking better and better!!!!!

[Jonathan]

i know its a bit off topic but what alternatives would you consider to ballscrews on a 6' or 8' setup

I wouldn't.

[Ricardoco]

Nope im not buying 8' ballscrews with all the work that comes with them so i need an alternative...

[Jonathan]

Nope im not buying 8' ballscrews with all the work that comes with them so i need an alternative...

Struggling to see how ballscrews could be considered a lot of work...compared to making an ATC spindle a rotating nut mount is a doddle. Please see what I posted here:

http://www.mycncuk.com/forums/showth...-advice-please

[Ricardoco]

Struggling to see how ballscrews could be considered a lot of work...compared to making an ATC spindle a rotating nut mount is a doddle. Please see what I posted here:

http://www.mycncuk.com/forums/showth...-advice-please

Let me cure your struggle for you... How much will you charge me for two of those units - steppers you designed and built.

[Jonathan]

I think it's a safe bet to say Jazz and I would only be interested in the 15000rpm, BT30 spindle:

http://www.spnd.com.tw/pem3-fps.html

Realistically I just can't afford one, but lets see what the price actually is first... Also could do with getting a drawing from them.