Chinese Spindles

[i2i]

you need a bigger mill

[Ricardoco]

you need a bigger mill

nasty nasty!! Hmmm I need a bigger workshop as well but im not sure i will get either this is what its all for...

[JAZZCNC]

nasty nasty!! Hmmm I need a bigger workshop as well but im not sure i will get either this is what its all for...

Just random thoughts that popped into my head on first sight. . . Doh I hate my brain when does this.

That tool change station needs putting in a box or moving.? Where it is will get covered in chips and crap and will be useless.
Also that shelf.? If it's for the controlbox/PC etc then I wouldn't do that either for same reason.!!

[Ricardoco]

Just random thoughts that popped into my head on first sight. . . Doh I hate my brain when does this.

I like random thoughts they help me consider the things ive forgotten and the things ive messed up so crack on..

That tool change station needs putting in a box or moving.? Where it is will get covered in chips and crap and will be useless.
Also that shelf.? If it's for the controlbox/PC etc then I wouldn't do that either for same reason.!!

all the screens and guards have been ommited for clarity, the shelf will have doors on it and the tool rack will actually be behind a guard that moves when needed

[Ricardoco]

Unrelated i Know but look at what ive got... another toy (this was the picture from the auction)

[JAZZCNC]

I want a toolchanger like this one at the 58 second mark.!!!. . . . Infact I want this machine. .

http://www.youtube.com/watch?NR=1&fe...&v=9MFRPGf4JDk

[Ricardoco]

Ok Just had an update and i think we are getting a little closer...

" Hi Rick Pls check the attached, my quotation as below,
SPP1030-10-17F: FOB Dongguan US$1,142.00 in each.

Its max revolution is 10,000rpm, but if you insist 12,000rpm, price will be US$1,586.00, as we need to adopt Germany ceramics bearings, its cost is much higher than our standard bearings (NSK brand, made in Japan)

Any question, pls let me know.

Regards Sam

Ive Now asked for shipping and unit discount for 5..

so fingers crossed ...