Hi Jonny,
The lathe is a "C" part of the AUD, BUD, CUD , A, B and C family. I am not sure what the difference are with the CSB ...

For the grey pain I use Myford Grey (Nice color and easly found). Bought it from this guy:
http://www.lathespares.co.uk/myford-...rd-lathe-p-412

For the primer I used U-Pol (From Halford) Acid-8 for all aluminium parts and red-oxide for all cast iron / steel parts.

Great paint, can be sprayed (diluted with White-spirit) or brushed on directly...

Yellow pain was a spray can for the local DIY place.

Ha... almost forgot, you can get new labels (all the small aluminium plates / charts) directly from Boxford. a few quids each...

Post some pictures during your rebuild!


RNR