Thread: Diy Self Leveling System
-
28-05-2012 #11
-
28-05-2012 #12
-
28-05-2012 #13Always bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
-
29-05-2012 #14
A customer in the US used pretty much this set up to level the jigs and platforms they built their aeroplanes on.
We used ultrasonics to measure the level of 'water' in the connected 'buckets' to within a couple of mm, hydraulics did the actual movement. Why go to all this trouble? If nothing else, gravity can assist in measuring precise angles.
-
29-05-2012 #15
Its not just in America they use Jigs
Its no trouble for me to do really, i was playing in the garden today and ive arrived at the design WITHOUT using a hose pipe of course
with the ban and all...lol it must have been all the usefull information i gathered from the post...lmaoAlways bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
-
29-05-2012 #16
-
29-05-2012 #17
I do sympathise with you i really do (except for the fact your beer is cheaper that is).., and i wouldnt mind the hose ban if we hadnt had the highest rain fall since records began, i do admit it all fell in the last 8 weeks but still they say they arnt going to lift it.........
Always bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
-
29-05-2012 #18
-
17-07-2012 #19
Couldn't the bed be made with three legs supporting a torsion box type table? It may not be level but any twisting moment would be eliminated.
-
17-07-2012 #20
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Gerber system 48
By martin54 in forum Milling Machines, Builds & ConversionsReplies: 67Last Post: 13-09-2013, 12:35 PM -
BUILD LOG: Gerber system 48 conversion
By martin54 in forum DIY Router Build LogsReplies: 14Last Post: 25-08-2013, 11:29 AM -
Gerber system 48 Plus router
By poppa jock in forum Machine DiscussionReplies: 0Last Post: 29-07-2013, 05:43 PM -
My Coolant System
By Tenson in forum Swarf & Chip ManagementReplies: 6Last Post: 08-04-2013, 01:59 PM -
Questions on modification of a system
By m.marino in forum Marchant Dice MachinesReplies: 3Last Post: 18-01-2009, 01:08 PM
Bookmarks