Quote Originally Posted by don_jarr View Post
Hi All

many thanks for the info, I will get a couple of bits of alloy sheet and have a play and if the results turn out ok post some pictures.

Many thanks again

:) Don
When you say sheet what do you have in mind.? . . . Reason I ask is, if thin sheet 3-4mm then most tends to be low grade 1050 stuff and very shity sticky stuff. The grade of aluminium makes a big difference to cut quality. I mainly work with 6 series, 5 series if I have too but not keen unless harder grade 5083 H32 has lesser grades can be sticky with hard spots.!!