-
31-05-2012 #1
I’m looking for a machine with a cutting bed size of approx 1000x500mm. The machine is for general hobby use and therefore is required to cut Wood, Plastic and Aluminum. I would appreciate your view or experiences on the above from www.cnc3axis.com
Standard accessories included:
- NCStudio Software, cable and controller.
- Communication cable
- Water Pump
- Power cable
- Clamp: 4 sets
- Wrench: 2 pieces
- Collet 1pc& adapter( for ф3.175 to ф6 )1pc
- Bits: 8 pieces (6 pieces Flat bottom bits, 2 pieces Two spiral flute bits
Spindle spec:
- Spec: 65*210 mm (Diameter:65mm x Length:210mm)
- Power: 800W
- Voltage: 220V~250V
- Frequency: 400 Hz
- Speed: 8000-24000 R/min
- ER11 collet chuck
Stepper drivers:
- Input Voltage: 220V-240 V, 50/60HZ
- Output Voltage: 0-240 VAC
- Output Power: 1.5 KW
- Output Frequency: 0-400 Hz
- Output Current: 7.0 A
- Capacity: 2.8 KVA
- Overload Capacity: 10.5 (60s)(A)
Stepper Motors:
Last edited by Rockeyes; 31-05-2012 at 05:22 PM. Reason: Typo
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CNC machine "Spanish" model . Advice and opinions needed!
By shapebusters in forum Machine DiscussionReplies: 17Last Post: 12-03-2014, 06:21 AM -
The Journey begins.. new to me.. my first CNC - Black Cat
By Fivetide in forum Milling Machines, Builds & ConversionsReplies: 37Last Post: 22-10-2012, 05:48 PM -
Has anyone got/used a machine from Black-Cat-CNC?
By cjpwart in forum Milling Machines, Builds & ConversionsReplies: 11Last Post: 12-08-2012, 05:15 AM -
Opinions sought on cheap desktop PCB milling machine
By ksangeelee in forum Milling Machines, Builds & ConversionsReplies: 55Last Post: 16-03-2012, 01:57 PM -
eBay: 2GB USB Flash Memory, Swivel Stick (black)
By Lee Roberts in forum Items On eBay UKReplies: 1Last Post: 17-12-2008, 05:34 PM
Bookmarks