Thread: few questions.
Threaded View
-
03-06-2012 #1
I'm looking to get something I can use T-Nuts in for my bed, I was thinking the 16x160 from this site
the size of my bed is about 320x420 so a metre of it should be fine. will something like this be suitable to hold a heavy vice?
the extrusion would sit on top of 10mm aluminium plate.
I'm also looking to get a vice, but I'd quite like to get one with a corner on it. So I could flip work over with out having to zero one axis.
Anyone know where I could find one? or do I just have to modify a normal vice?
I'd ideally want it to be under £50..
I recently made a clutch lever for my motorbike, but the edges were quite sharp and uncomfortable. I want to be able to make the corners/edges curves. I'm guessing I would need a ball end mill and take lots of passes moving outward slowly to make it curved?
I'm use vcarve but I'm unsure as to how I could do it in that, if you could suggest some software that can do it or how to do it in vcarve then that would be great!
thanks :)
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
questions...questions
By victorismyhero in forum Machine DiscussionReplies: 4Last Post: 16-07-2013, 06:44 PM -
I want to DIY.. some questions please!
By Tenson in forum Gantry/Router Machines & BuildingReplies: 95Last Post: 24-04-2012, 10:10 PM -
NEW MEMBER: Hi all just a few questions!
By dubchip in forum New Member IntroductionsReplies: 17Last Post: 02-12-2011, 10:47 PM -
NEW MEMBER: Hi all just a few questions!
By dubchip in forum New Member IntroductionsReplies: 3Last Post: 10-11-2011, 03:40 PM -
New in CNC and I have some questions
By demestav in forum General DiscussionReplies: 0Last Post: 14-09-2011, 12:19 PM
Bookmarks