Mach3 + 2010 Screenset crashing. "Error found , Art Code: 9988"

[Mad Professor]

I just uninstalled eveything to do with mach3, and then deleted "C:\Mach3".

I then installed Mach3 3.043.022, No LazyCam, no PrinterPort driver, no ESS Plug-in, Installed 2010 ScreenSet, Copied Mach3 xml and license file to "C:\Mach3".

I then ran Mach3 with my xml file, and I was still able to make Mach3 crash.

So I thought there might be an error with my xml file, so I loaded Mach3 with the default xml, and I can still get it to crash.

Any more ideas?

[JAZZCNC]

Ermmm. . . Ok. This sounds very much like your XML is fubar. 2010 set is stable on that version I know that 100%

Try creating a new XML using the 1024 set and the ESS installed then try to see if it works ok, then install 2010 set and test again.?

[JAZZCNC]

Opp's my Bad.!! Didn't see that you had already done that.!!!

Could it be a computer conflict.? I don't use win7 on my machines only XP. Try running has adminstrator.?
I know the PP driver doesn't work on 64bit but Mach does and the ESS so can't see it being an issue here.?

To me it seems computer related because like I say I know 2010 is stable on .R3.043.022 you could try belt and braces approach and try the absolute known stable Mach version that Gerry use's and designed the 2010 set on which is Rev R3.042.020.?

After this this then I don't know.!