Mach3 + 2010 Screenset crashing. "Error found , Art Code: 9988"

[JAZZCNC]

Ok quick update.

I've just installed dev version ending .062 on my win7 32bit with 2010set and it works fine in both PP and USB SS and purelogic Ethernet. Followed your exact actions in the video and works fine.? Tried to break it by usig different combo's and still it's stable.

So maybe you have an issue on the machines your running.? Maybe some other software is conflicting.? The machine I've just tried it on here is my house laptop and it's loaded up with all kinds of crap so not optimised in anyway.!!

[Ger21]

I posted some information here 2 days ago, that was not approved by a moderator yet???

This probably won't be either but...

Mach3 version 3.43.022 has a serious bug that causes Mach3 to lock up when using the tool change macro (M6) from the 2010 Screenset. I don't know for sure, but my guess is that this bug is in all 3.43.xxx versions prior to 3.43.028, where it was fixed. You really should'nt try using any of these versions.

For Jazz, the routines probably don't work because the G31 probe commands need the parallel port driver (or motion device plugin) to work correctly. Perhaops the russian cards plugin doesn't support G31 properly?

I have a new PC with Windows 7 x64 at work that I can do some testing on, but I'm leaving on vacation in a few days and won't be able to check for about 2 weeks.

This is really starange. My guess was that it's a Windows 7 x64 issue, but you're seeing it on 32 bit as well???
There are about 750-800 2010 Screenset users, and I have no other reports of this.

[Lee Roberts]

I posted some information here 2 days ago, that was not approved by a moderator yet???

This probably won't be either but...

Hi Gerry?

I've had a look at the moderation queue and we dont have anything out standing that needs looking at, on viewing the moderation log i can see this entry: Jonathan 23:17, 7th Jun 2012 Post Re: Mach3 + 2010 Screenset crashing. "Error found , Art Code: 9988" by Ger21 Removed

I dont know why Jonathan removed your submission but i will find out and let you know. Sorry for any inconvenience, as such your account has now been given full privileges and you no longer require your posts/threads to be moderated.

Regards,
Lee

[John S]

Hi Gerry?



I dont know why Jonathan removed your submission but i will find out and let you know. Sorry for any inconvenience, as such your account has now been given full privileges and you no longer require your posts/threads to be moderated.

Regards,
Lee

Perhaps requires a smack on the back of his head ?

[Lee Roberts]

Perhaps requires a smack on the back of his head ?

Was going to trip him up on way to smoke room ?

[JAZZCNC]

I dont know why Jonathan removed your submission but i will find out and let you know. Sorry for any inconvenience, as such your account has now been given full privileges and you no longer require your posts/threads to be moderated.

Because he's been seduced to the Dark side with promise of a Quicky round back of the bike shed. .

Gerry: (It's Dean-Hemsworthlad) I've not had time to play properly with Russian card but it works fine with all probes using win 7 32bit and mach dev .062. 1.1.2 screen. (send me update please when you get chance.!!)
Just 64bit version it failed on but it didn't even attempt to try working, just has if the call to load 2010 probe screen was being ignored.? All the probe buttons acted has if the weren't active, simple. autotool all of them were dead with no response or error message. I even went and checked the macros to see if they had gone Awol.!!. . . .Very strange.!

Hopefully later tonight I'll have more time to test things and see whats happening better.!

[Ger21]

All the probe buttons acted has if the weren't active, simple. autotool all of them were dead with no response or error message. I even went and checked the macros to see if they had gone Awol.!!. . . .Very strange.!

Did you copy the macros into the Mach3\macros\yourprofile folder? If not, that will cause what you're seeing.

[Jonathan]

I dont know why Jonathan removed your submission but i will find out and let you know. Sorry for any inconvenience, as such your account has now been given full privileges and you no longer require your posts/threads to be moderated.

I remember deleting a post recently because I saw it was an exact duplicate of a previous post? It seems I made a mistake, very sorry for the inconvenience.

Can't think of anything more than I've already suggested about the apparent problem with Mach.