Mach3 + 2010 Screenset crashing. "Error found , Art Code: 9988"

[Ger21]

So I once again installed Mach3 3.043.062, No LazyCam, No PrinterPort Driver,...............................





I am going to setup a VM on my home PC so that I can install multiple OS's XP, NT, 2K, W7, etc, to see what I can find out.

Try with the printer port driver installed. A lot of things in Mach3 don't work correctly without it.


Also, I'm not sure if everything will work correctly using a VM. I don't think you can run a machine with Mach3 through a VM. At least I've never heard of anyone doing it. And if it's not fully functional, it's not a valid test.

One thing you might want to try is install 3.42.040 first, then install 3.43.062 on top of it. It doesn't crash here with 3.43.062.

You did say that it only crashes from the probe wizard toolbar button, right? What if you click the wizard button, then choose the probing wizard?

As said above I am up and running using Mach3 3.043.006, but I want to try and get to the bottom of why the newer versions crash.

Thanks again.

As I mentioned above, if you do a toolchange with that version, it may cause Mach3 to lockup, which requires a hard reboot to recover.