Thread: Good or bad idea? Concreate!
Threaded View
-
08-06-2012 #6
Epoxy and sand is a valid combination. The advantage of course with using epoxy over just sand is you will add strength. It's going to need to be very thin to go through the extrusion, bubbles/voids could be a problem.
The other question is, is it worth spending lots of money on epoxy on such a cheap machine. I think you would be better off upgrading other parts of the machine. Sand on it's own is basically free so you might as well try it.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Website idea.
By qwertyjon in forum General DiscussionReplies: 18Last Post: 11-07-2014, 08:49 PM -
Here's an idea hacking a Kress 1050 FME
By m.marino in forum Kress Milling MotorsReplies: 3Last Post: 16-01-2013, 01:05 AM -
Cheap Idea for a DRO
By 1113562 in forum General ElectronicsReplies: 70Last Post: 27-02-2011, 04:20 PM -
BUILD LOG: Mel's Odd Idea
By mel_earp in forum DIY Router Build LogsReplies: 3Last Post: 19-03-2010, 11:54 AM
Bookmarks