Thread: Advice: Timing Pulleys and Belts
Threaded View
-
21-06-2012 #1
Good day all.
As per the title I am looking for advice regarding suitable timing pulleys and belts mainly for my Z-Axis.
I am using TR16x4D leadscrew, but will be looking at upgrading to 1605 ballscrew near the end of the year.
I am also using M60STH88-3008DF 3Nm Stepper Motors, 752 Stepper Drivers, eBay BT PSU @ 42.5Volts, Ethernet SmoothStepper.
My stepper motor can be moved forward or backwards, and from the leadscrew has a center distance of 75-100mm.
The absolute maximum OD of the pulley I can fit on the leadscrew is 50mm.
Can you please advice.
Thanks for your time.
Best Regards."If first you don't succeed, redefine success"
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Ballscrews - pulleys - timing belts
By vre in forum Gantry/Router Machines & BuildingReplies: 0Last Post: 15-01-2014, 08:03 PM -
Belts & pulleys,
By jcb121 in forum Belt Drive, Pulleys & TimingReplies: 4Last Post: 29-09-2012, 12:32 AM -
pulleys and belts - sizes
By mocha in forum Belt Drive, Pulleys & TimingReplies: 3Last Post: 22-07-2012, 05:16 PM -
Belts & pulleys & advice please
By CNCBlug in forum Belt Drive, Pulleys & TimingReplies: 12Last Post: 29-04-2012, 10:31 PM -
Source for XL timing belts and pulleys
By MikeyC38 in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 20-08-2009, 01:21 PM
Bookmarks