Threaded View
-
02-08-2012 #8
Thanks Jonathan. I had already saved those up off a previous post of yours I think.
I'm after the size of the BK and BF support blocks, and particularly the dimensions from the centre of bearing to each of the edges. My current design looks like too tight a fit for these blocks, so would like to know what I need to cater for.
How do you guys normally accurately align the bearings and ballnut?
I'm guessing I need to allow some leeway in order to be able to adjust during setup.... Is this normally done at the ballnut or at one of the bearings and if so which bearing?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
tools for 3d wood carving
By chris in forum Marketplace DiscussionReplies: 5Last Post: 18-01-2014, 04:23 AM -
BUILD LOG: Monster fixed gantry router for aluminium & wood
By jonboycnc in forum DIY Router Build LogsReplies: 9Last Post: 12-01-2014, 11:26 PM -
BUILD LOG: Aluminium Extrusion CNC Router Build
By joshendy in forum DIY Router Build LogsReplies: 9Last Post: 10-04-2012, 08:26 PM -
BUILD LOG: Planning and build of my "8020" aluminium CNC Router
By monza in forum DIY Router Build LogsReplies: 14Last Post: 06-02-2010, 11:55 PM -
Source of Wood to build a Solsylva 37x25 CNC
By MikeyC38 in forum Gantry/Router Machines & BuildingReplies: 8Last Post: 06-07-2009, 11:42 PM
Bookmarks