Quote Originally Posted by WandrinAndy View Post
Please "holler" about the problems... I'm that thickskinned that I cannot recall ever having taken offence at anything!

Thanks,

PS. Is 5mm aluminium sufficiently thick to make a M6/M8 tapped thread reasonably strong?
Ok I'll holler first but not too much. . Lol

45x45 extrusion is pretty weak so I would consider going larger.!

5mm in aluminium is NOT enough. M6 = 1mm pitch so only 4 full threads M8= 1.25mm pitch so 3 full threads no where near enough and it will strip.!!