Threaded View
-
11-08-2012 #17
Last Activity: 17-03-2017
Drive shaft length of a Nema23 is 20mm of the main face, 19mm off the reference lip and you need a 38.1mm hole to accomodate the reference lip on the face of the motor (or bigger if you are not using the reference). So if your pulley is <38mm dia and <10mm wide you can fit the pulley before mounting the motor. Otherwise you'll have to recess the motor by milling a 56mm wide recess, 5mm deep, in the 10mm plate... or find another way
-
The Following User Says Thank You to irving2008 For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
tools for 3d wood carving
By chris in forum Marketplace DiscussionReplies: 5Last Post: 18-01-2014, 04:23 AM -
BUILD LOG: Monster fixed gantry router for aluminium & wood
By jonboycnc in forum DIY Router Build LogsReplies: 9Last Post: 12-01-2014, 11:26 PM -
BUILD LOG: Aluminium Extrusion CNC Router Build
By joshendy in forum DIY Router Build LogsReplies: 9Last Post: 10-04-2012, 08:26 PM -
BUILD LOG: Planning and build of my "8020" aluminium CNC Router
By monza in forum DIY Router Build LogsReplies: 14Last Post: 06-02-2010, 11:55 PM -
Source of Wood to build a Solsylva 37x25 CNC
By MikeyC38 in forum Gantry/Router Machines & BuildingReplies: 8Last Post: 06-07-2009, 11:42 PM
Bookmarks