Threaded View
-
10-07-2012 #7
Redrawn the z axis with new 25mm plates for the rear and front. Also included registers for the NSK rails and slides although they are only 1mm. It is a very tight fit and looks much sleeker now at only 64mm depth. I suppose If I had to then I could sink the bk/bf blocks a few mm into the rear plate, just where the blocks go. Its not easy to show but the ball nut's flange head sticks into the front plate by a few mm, which could be a good thing if the hole is machined accurately.
The spindle cutter head has now moved 30mm towards the y axis and now rests between the x axis bearing blocks. Pictures showing the new design and also how far the z extension could be dropped. Its around 250mm, not that I would need that much, but the rails are long so might as well use them. I try to put as many detailed pics up for all novices to see, as this is what I was looking for while doing my research. Hope it helps someone.
Adil
-
The Following User Says Thank You to Iwant1 For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 5 users browsing this thread. (0 members and 5 guests)
Similar Threads
-
CONVERSION: Re-Built a used CNC mill machine to the point of 80%
By dudz in forum Conversion Build LogsReplies: 13Last Post: 20-03-2014, 06:44 PM -
Start of a new built.
By Tanky_Turk in forum Gantry/Router Machines & BuildingReplies: 10Last Post: 06-03-2014, 09:26 PM -
WANTED: Milling machine head
By Ainis in forum Items WantedReplies: 0Last Post: 23-07-2013, 09:30 PM -
WANTED: home built cnc
By japcarmaniac in forum Items WantedReplies: 1Last Post: 24-04-2013, 02:35 AM -
Already built my machine.. but some pics of work etc
By Yohudi in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 31-08-2007, 06:15 PM
Bookmarks