Threaded View
-
10-07-2012 #8
Ermm.!! . . . . Been looking at this thinking don't seem quite right.??? . . . I'm sure it's correct because you've obviously taken lots of time over it but I'll ask anyway just in case.!!
The bearing/rail height seems low.? from the dimensions on the drawing it appears to be about 16mm this is very low even for 15mm profiled rails and surely can't be right.? Do you have the bearings set in pockets.?
Thread Information
Users Browsing this Thread
There are currently 5 users browsing this thread. (0 members and 5 guests)
Similar Threads
-
CONVERSION: Re-Built a used CNC mill machine to the point of 80%
By dudz in forum Conversion Build LogsReplies: 13Last Post: 20-03-2014, 06:44 PM -
Start of a new built.
By Tanky_Turk in forum Gantry/Router Machines & BuildingReplies: 10Last Post: 06-03-2014, 09:26 PM -
WANTED: Milling machine head
By Ainis in forum Items WantedReplies: 0Last Post: 23-07-2013, 09:30 PM -
WANTED: home built cnc
By japcarmaniac in forum Items WantedReplies: 1Last Post: 24-04-2013, 02:35 AM -
Already built my machine.. but some pics of work etc
By Yohudi in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 31-08-2007, 06:15 PM
Bookmarks