jon's homemade cnc

[JAZZCNC]

Was hoping within the next couple of weeks, but I damaged (or may have been defective) a linear bearing while assembling it(a couple balls dropped out), so im now waiting for some bearings to arrive.

Ye it's a bitch when your balls drop out and before ye know it you have an ASBO. .

Regards the frame then it's not a big job to do really. Just take 2 diagonal lengths off each leg with brackets at each end that bolt into leg and top rail. . . Simplizz really.
Doing it like this will also allow some adjustment for centre if when testing you find the top rail is slightly bowed.?

[Jonathan]

Just take 2 diagonal lengths off each leg with brackets at each end that bolt into leg and top rail. . . Simplizz really

I agree ... it's well worth it.

[JAZZCNC]

I agree ... it's well worth it.

Yep I agree with that has well.!!! . . . Steel box is nice and cheap but if it hits the right resonance it can sing like that annoying twat off Go compare Advert. So anything you can do to help minimise this will show in the finish.