Spindle to uniport

[AdCNC]

Just for test sake could you not just slap a G04 P1000 on the N160 line after the M3 command.. or am i missing the point on this one!! :-S

[JAZZCNC]

Just for test sake could you not just slap a G04 P1000 on the N160 line after the M3 command.. or am i missing the point on this one!! :-S

Yep could do that but the built in delay function should work that way and can't understand why it's not happening.?

Just trying to determine if it's happening or not, the G04 P should work but that doesn't help if Mach's playing up.!!