Thread: Wiring home and limit switches
Threaded View
-
01-12-2013 #15
You don't need to use CY cable for your limits assuming it's a 24v circuit. I would use twin cable and bring them back to a junction box where you can series them up. If later on you want to change how they are connected then you won't need to rewire them, just change how they are connected in the junction box. The limits circuit is low current and low voltage so I plan to use twisted pair CAT5 cable, because it's twisted it is effective at screening out noise.
Last edited by EddyCurrent; 01-12-2013 at 10:17 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
EMC2 home/limit switches... only acting as limit?
By vputz in forum LinuxCNC (EMC)Replies: 4Last Post: 15-10-2014, 09:51 AM -
24v Limit/Home switches. How to..?
By Wal in forum General ElectronicsReplies: 6Last Post: 17-11-2013, 05:52 PM -
Limit Switches with LED's
By manofgresley in forum General ElectronicsReplies: 30Last Post: 02-01-2013, 03:08 PM -
Limit/home switches - how are you mounting 'em?
By HankMcSpank in forum General DiscussionReplies: 2Last Post: 13-11-2011, 01:42 PM -
The best solution for limit / home switches on a mill is .....what ?
By NICKMODELMAKER in forum Gantry/Router Machines & BuildingReplies: 1Last Post: 29-05-2010, 01:38 PM
Bookmarks