Threaded View
-
25-07-2012 #2
Last Activity: 17-03-2017
25mm dia screw if supported in fixed/fixed bearing configuration will whip at 550rpm or 5.5m/min on a 10mm pitch
32mm dia screw if supported in fixed/fixed bearing configuration will whip at 746rpm or 7.5m/min on a 10mm pitch
either way the inertia is high so a hi volt/hi current/hi torque motor is needed...
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Need Some Custom Machined Ball Screw Advice Please
By Hobgoblin in forum Gantry/Router Machines & BuildingReplies: 1Last Post: 12-10-2012, 09:37 PM -
Ball screw
By luke11cnc in forum Lead Screws, Nuts & SupportsReplies: 5Last Post: 20-10-2011, 01:28 PM -
WANTED: 12mm ball screw & nut
By phill05 in forum Items WantedReplies: 8Last Post: 22-06-2010, 09:26 PM -
Ball Screw Accuracy V Price
By Wobblybootie in forum Lead Screws, Nuts & SupportsReplies: 5Last Post: 02-01-2010, 11:55 AM -
Stationary Ball Screw
By Wobblybootie in forum Lead Screws, Nuts & SupportsReplies: 14Last Post: 29-12-2009, 01:12 PM
Bookmarks