Thread: Lenze 534
-
27-07-2012 #1
Hi all, My lenze speed controller on my Boxford 260 has finally died, would anybody be able to suggest a suitable replacement?
Always bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
-
28-07-2012 #2
http://www.ebay.co.uk/itm/LENZE-534-...item58801c3c76
It's in the states unfortunately
Sprint do a good range, but the omly one i could find on ebay is a 4amp 3600, which will probably be too small
-
28-07-2012 #3
the sprint 1200 should be right for your boxford, or the 1600
-
28-07-2012 #4
Its hard to look for alternatives if you dont know what it really is, so i knew someone on here would know. It went bang in the middle of a job luckily it was moving in the safe Z so i was lucky the part is saved, i took the lid off and a capicitor had spat its guts out, ive replaced the cap checked the fuse but it remains on the critical list with no sign of life at all.... Im assuming it is a VFD of some description..
Always bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
-
28-07-2012 #5
dc drive....
-
28-07-2012 #6
I think there are repair services out there for the lenze but i suspect it would be cheaper to buy the spring for sure..
Always bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
-
28-07-2012 #7
both drives are around £150+ for a new one
-
28-07-2012 #8
-
28-07-2012 #9
sprint and the lenze
-
29-07-2012 #10
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Very Sick Lenze 534 Controller
By Ricardoco in forum Motor Drivers & ControllersReplies: 32Last Post: 09-09-2020, 11:19 PM -
Broken transformer in Lenze Speed Control 530.
By Samuel59 in forum Motor Drivers & ControllersReplies: 3Last Post: 23-04-2014, 12:22 PM
Bookmarks