Torch Height control

[Bobp]

Hi Rick,

It is the same as the one shown on the ebay link and any photo on the disc or manual is the same

[Ricardoco]

Hi Rick,

It is the same as the one shown on the ebay link and any photo on the disc or manual is the same

Have you fitted it to a machine and if so have you used any of the inputs where the E-stop input is shown in the add?

[Bobp]

I have used all those inputs for e stop and limits. May have to forget about the limits and use those pins?

[Ricardoco]

I have used all those inputs for e stop and limits. May have to forget about the limits and use those pins?

I think there are inputs where the pendant plugs in, ill have a look see..

[Ricardoco]

I have used all those inputs for e stop and limits. May have to forget about the limits and use those pins?

nope I cant see any spares so either lose two limit inputs or look at the pendant input, after all you are joging the Z up and down with the THC arnt you?


Rick

[Ricardoco]

nope I cant see any spares so either lose two limit inputs or look at the pendant input, after all you are joging the Z up and down with the THC arnt you?


Rick

To be fair i struggled with inputs on my own machine so got another Parallel card from ebay and the cheapest Breakout board i could and ran all my limits from that board only..

[Bobp]

Thanks Rick

[Bobp]

I will use the z limits inputs. I have been sickened with waist thus far so the thc is a must.

Thanks for your help Rick

[Ricardoco]

You are very welcome, but hey keep me updated with your Plasma exploits as im building 1 myself next month and i would be very interested in how things turn out with your THC as i suspect i will get the same one you have..

[Nibbler]

I know this thread is pretty old but may I ask if you ever had success ? I want to use a TB6560 with Proma THC too and I am a bit confused with the manual.