Torch Height control

[Ricardoco]

Ahhh i see, have you got a better picture of your TB 6560 as there are several variations:




Such as the one above that dosnt appear to have the ones you mention behind the 15pin D





This one clearly shows some spare inputs on the right..

I know you have a Ebay picture listed but can you get a better picture of the terminals for me..

Rick

[Ricardoco]

If all else fails and you have used all the inputs near the Estop input (there are 4 possible) then you may have to use the pendant input (15pinD) lets see what the pic tells us

Rick

[Bobp]

I think this may give more info

http://www.fozztexx.com/CNC/HY-TB3DV-M_3Axis_Driver.pdf

[carlos]

Ahhh i see, have you got a better picture of your TB 6560 as there are several variations:




Such as the one above that dosnt appear to have the ones you mention behind the 15pin D





This one clearly shows some spare inputs on the right..

I know you have a Ebay picture listed but can you get a better picture of the terminals for me..

Rick

Hi friend, I know it is a long time after this thread that I ask this question, I have the same problem of not knowing where to connect my proma thc 150 compact, I have a 4-axis TB6560 but in reality I am a bit lost with respect to the manual of the sensor, my plasma is a powermax 65, if you could give me a hand I would appreciate it very much