Quote Originally Posted by Web Goblin View Post
Irving,
how are you getting on with your planning?
Is your warco MD30 the same as the Major milling machine? If so how are they?

MD30 is roughly equivalent to the later Warco Minor (it was rebadged) which they no longer sell and is smaller than the Major, but not much. Table I think is the same size 680 x 180 or thereabouts but the column is 95mm rather than 105mm or something like that...

re workshop, I've now got costs for materials down to £6300 by virtue of overestimation of the cu meterage of the foundations... been looking at sectional concrete buildings as an alternative as the quote for that came in at under £4000 installed plus base but I am worried it might be a compromise too far... will need extensive mods to the roof to make it insulated (by default they are not nor do they have draught proofing!) and would need to insulate the walls too, plus you can't drill into the walls (else it invalidates the 10y guarantee) so not sure how I'd fix electrics (dont want the socket strips on the benches) plus got VFD for mill, Emergency Stop for whole workshop by door, etc. And I want my whiteboard for scribbling on, wall hanger for the bikes, etc etc.... waiting on a couple of firms to explain how they do that... in the brochure it shows offices made of the stuff with plastered walls but nothing on the walls :(