Confused need help!

[Sprut_UK]

Thats excellent software for free. .

Why don't you show the prices of the other versions of the software.? Are the prices that scary.?

I'm very interested in trying the expert version but don't want to waste my time playing with the trial version if the price is out of my reach.!! Would be much better if the prices were there to be seen.!

Hi Jazzcnc, thank you for your question. We don't put the prices on the website for several reasons, the main one's being: just comparing prices of 'apparently' similar products can lead to a customer making a wrong commercial decision.........the cheapest software is not always the 'best value' and more expensive software can sometimes lead to a far higher 'return on investment'.
For many companies there is a requirement for integrating their machines directly into the software for toolpath calculation as well as for simulation purposes, this is an unknown cost until we get to see the machinery being used.
We provide a totally free 30 day trial of the full product for anyone to try. After the 30 day trial is finished the software will revert to Express mode.

In the UK we have arranged pricing specifically for hobby users who don't usually require instant support and who are generally happy to teach themselves (to a certain extent) how to use the software. The only difference between the hobby product and the full commercial version is that the hobby version can only use one dedicated postprocessor e.g. Mach3 or WinCNC etc.
If the Express version of SprutCAM does not suit your hobby needs then the Hobby version can be purchased for £850 (no vat), this includes turning and milling (2/2.5/3/4/5D).
If you are a commercial customer, please feel free to PM me for more details.

I hope this post doesn't break any forum rules?

Dave