Linier slide bearings - can they be adjusted?

**John S** · 10-08-2012

Nip the blocks up in the vise and hammer them back onto the rail.

Failing that do a search on here for a post by Jonathan on Torsional Stiffness of Round Rails. If I remember right it ran to about 6 pages, print this out and cram it into the ball bushings.

**WandrinAndy** · 10-08-2012

Originally Posted by John S

Failing that do a search on here for a post by Jonathan on Torsional Stiffness of Round Rails. If I remember right it ran to about 6 pages, print this out and cram it into the ball bushings.

Wish I had taken some of the stuff that you're on tonight... Lol Lol

**JAZZCNC** · 10-08-2012

Originally Posted by John S

Nip the blocks up in the vise and hammer them back onto the rail.

Failing that do a search on here for a post by Jonathan on Torsional Stiffness of Round Rails. If I remember right it ran to about 6 pages, print this out and cram it into the ball bushings.

Failing that tell him to throw some sausages & burgers on the bed and light Jonathans "Stiffy" papers sit back watching olympics and learn how to waste even bigger money. .