Denford Triac Mach3 conversion

[rnr107]

Hi all,
I bought a Triac (The green one with stepper motors) and I started the conversion to run on Mach3.
Here are some pics of what I've done so far...
first, machine as received, then disassemble and got reed of the base (too big) ready for transport home!



Now, move upstairs in the side bedroom (yes bedroom... )



Start wiring 3 Phase spindle drive and stepper motors.

More coming soon !

RNR

[i2i]

looking good Laurent, are you going to fit a bigger table as it's all apart, and even an extension to the y axis.

[rnr107]

looking good Laurent, are you going to fit a bigger table as it's all apart, and even an extension to the y axis.

I am going to get all the electronic working first... Then I'll see if it needs extensions! :-)
I would'nt mind a drawing for those tho!

Laurent

[i2i]

no drawings yet, but there are tables around the right size that will suit.

[rnr107]

OK,
I received the electronic now, except for the 3 phase inverter.
I got all 3 steppers running. Now looking for a suitable enclosure.
Anybody got an idea where I could find an electrical cabinet between let say L450 x W300 x H200 and L600 x W500 x H200 that doesn't cost a fortune ?

Ta,
Laurent

[JAZZCNC]

Anybody got an idea where I could find an electrical cabinet between let say L450 x W300 x H200 and L600 x W500 x H200 that doesn't cost a fortune ?

Ta,
Laurent

Depends what you call a fortune but I use these and don't consider them a fortune for a Nice quality box.!! Metal Enclosure IP65 500mm x 400mm x 200mm - Galvanised Steel

[i2i]

Mild steel cabinets | EuroBox Enclosures (01932) 230 123

these seem cheap, or you can try your local electrical wholesaler.

John S put a link up for a supplier a while back.

[JAZZCNC]

John S put a link up for a supplier a while back.

Was same link has the one I've just put up.

[rnr107]

Thanks guys! I think I know what to look for now. :-)

[rnr107]

Hi all,
I started to put the new electronic together this weekend. See pictures attached.



Waiting for more bits to before putting it all in the enclosure...!

RNR