Denford Triac Mach3 conversion

**rnr107** · 19-08-2012

Thanks guys! I think I know what to look for now. :-)

**rnr107** · 28-08-2012

Hi all,
I started to put the new electronic together this weekend. See pictures attached.

Click image for larger version.

Name: new_elec_3.JPG
Views: 3362
Size: 339.8 KB
ID: 6684

Click image for larger version.

Name: new_elec_1.JPG
Views: 2708
Size: 256.8 KB
ID: 6685

Click image for larger version.

Name: new_elec_2.JPG
Views: 3751
Size: 266.4 KB
ID: 6686

Waiting for more bits to before putting it all in the enclosure...!

RNR

**rnr107** · 02-09-2012

OK,
Electronic wiring is now complete... :-)

Click image for larger version.

Name: Box2.JPG
Views: 3379
Size: 184.6 KB
ID: 6716

Click image for larger version.

Name: Box1.JPG
Views: 1019
Size: 94.2 KB
ID: 6717

**cncstarter** · 23-10-2014

Originally Posted by rnr107

Hi all,
I started to put the new electronic together this weekend. See pictures attached.

Waiting for more bits to before putting it all in the enclosure...!

RNR

Hi , are you still using the machine. How it is going on. I am from Melbourne,Australia. I am going to pick one soon and can't wait to start getn to job of setting it to Mach3. But i am a dumb in all the interface stuff. Can you give me a brief idea , what driver you have purchased, can I keep the existing steppers and also what need to be changed in power supply....in a total complete instruction of your work.