Thread: Denford Triac Mach3 conversion
-
13-08-2012 #1
Hi all,
I bought a Triac (The green one with stepper motors) and I started the conversion to run on Mach3.
Here are some pics of what I've done so far...
first, machine as received, then disassemble and got reed of the base (too big) ready for transport home!
Now, move upstairs in the side bedroom (yes bedroom... )
Start wiring 3 Phase spindle drive and stepper motors.
More coming soon !
RNR
-
14-08-2012 #2
looking good Laurent, are you going to fit a bigger table as it's all apart, and even an extension to the y axis.
-
15-08-2012 #3
-
18-08-2012 #4
no drawings yet, but there are tables around the right size that will suit.
-
19-08-2012 #5
OK,
I received the electronic now, except for the 3 phase inverter.
I got all 3 steppers running. Now looking for a suitable enclosure.
Anybody got an idea where I could find an electrical cabinet between let say L450 x W300 x H200 and L600 x W500 x H200 that doesn't cost a fortune ?
Ta,
Laurent
-
19-08-2012 #6
Depends what you call a fortune but I use these and don't consider them a fortune for a Nice quality box.!! Metal Enclosure IP65 500mm x 400mm x 200mm - Galvanised Steel
-
19-08-2012 #7
Mild steel cabinets | EuroBox Enclosures (01932) 230 123
these seem cheap, or you can try your local electrical wholesaler.
John S put a link up for a supplier a while back.
-
19-08-2012 #8
-
19-08-2012 #9
Thanks guys! I think I know what to look for now. :-)
-
28-08-2012 #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Denford Triac VMC
By fidia in forum Milling Machines, Builds & ConversionsReplies: 6Last Post: 19-08-2016, 08:18 AM -
FOR SALE: Denford Triac
By asto in forum Items For SaleReplies: 19Last Post: 07-02-2016, 08:28 PM -
eBay: Denford Triac CNC milling machine mill mach3
By Fivetide in forum Items On eBay UKReplies: 0Last Post: 19-11-2012, 01:46 PM -
WANTED: Denford Triac
By edwardsjc in forum Items WantedReplies: 13Last Post: 20-08-2012, 08:17 AM -
RFQ: Looking for somone to finish conversion Denford Mirac with Mach3
By CHudson in forum Projects, Jobs & RequestsReplies: 0Last Post: 14-10-2010, 08:20 PM
Bookmarks