Threaded View
-
16-08-2012 #2
Last Activity: 17-03-2017
If you are refering to just the low voltage side (NOT stepper motor wiring, but breakout board to drivers and the 5V PSU for these, plus limit/home switches) then normal equipment wire 7/0.2 is fine e.g. Equipment Wire (7/0.2) : Equipment Wire : Maplin Electronics For the stepper motors back to their PSU you'll need something heavier, either 24/0.2 or 32/0.2, or you can use 4-core flexible mains cable.
As to the schematic, it depends on the actual board/drivers you have. but there are several on the site, try using the search function.
-
The Following User Says Thank You to irving2008 For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Breakout Board
By Tomnewry in forum General ElectronicsReplies: 2Last Post: 12-12-2013, 07:24 PM -
Breakout Board Comparison
By 200thhorseman in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 27-03-2012, 12:28 AM -
Breakout Board
By croy in forum Electronic Project BuildingReplies: 10Last Post: 18-08-2011, 07:50 AM -
FOR SALE: 4 Axis TB6560 Stepper Motor Driver Board
By Mad Professor in forum Items For SaleReplies: 1Last Post: 04-01-2011, 06:54 PM -
eBay: CNC Breakout board cheap - that will do me !
By Lee Roberts in forum Items On eBay UKReplies: 9Last Post: 14-08-2009, 05:52 PM
Bookmarks