BobCad Chamfering help

[craigrobbo]

Chamfer_ Z Down when XY offset - adepoalo's library


This video shows with no sound ( sorry) why the tool will cutter deeper in Z when you adjust the cutter position.

Thank you for getting back, I think I had an error in my installation.

On my laptop I created the tool path 3 times and had the same issue of it plunging randomly about 10mm away from the chamfer (almost like Bobcad had a bigger tool than I told it)
Then I came to my other PC and I did EXACTLY the same path, and it works perfect.

Since I reinstalled BobCad and it all works okay now.

Thanks for the help

Craig

[Justin flook]

Hey guys im new to the whole bob cad-cam scene, im self taught on the new version and im wondering if there is a way to cut a chamfer at an angle. im also having an issue with bobcad where i can extrude cut the chamfer onto the part. Any help would be greatly appreciated.