My garage

[wilfy]

the problem is with re-doing the roof is it's not my house.. we private rent.. everything i've done if needs be can be ripped off and put back to standard, i've already trialed the flashing on the roof... got my blow torch out up there and warmed the panels up stuck it down over the screws that are leaking IN water and they certainly are not letting any water in through the top.. as for condensation inside.. well i'm condensation free for over 36 hours now and 24 of that was before i stuck the insulation in there.

here is what i intend to use to support my weight up there 2moro so i can reach the bits i cant do off ladders (those screws go right the way across) i've stood in the middle on it 2nite and bounced up and down on it and it's not touching the floor.. the widest bits will be bearing down on the concrete so no stress on the tin.

Attachment 7620


and here is the panels up stuck to the roof for most part of the day, expanding foam in the gaps and foil tape in the joins, all i need to do is do the smaller cuts as i've been working on multipull things and not had chance to do them, like i said before though it's already warmer in there, started the day off when fan heater and rad to take the chill off the room and now it's maintaining the temp with the oil rad turned to about 3/4 and there is still loads of gaps i need to fill