Epoxy granite or mineral casting

[compositepro]

John

I figured out this stuff a while ago, kind of had to, anything to do with composites has always been a bit of, ask the people who say they can how they do it,when they tell you it will cost lots and they will half heartedly supply you with information or a product that only they say they can make

most of the time its easier to tell them to p*** of and do it yourself

Nice to see someone who is trying to teach the old dogs new tricks over there ...

im pretty sure eventually making machines out of metal will be raplaced by gluing them together

[JAZZCNC]

I figured out this stuff a while ago, kind of had to, anything to do with composites

So why not share with us then.!!. . . . . Start by telling me some where local that's cheap for Epoxy.??

[compositepro]

Epoxy isn't cheap here like everything here you pay thru the nose,
Theres a firm called fibreglass supplies in leeds and im not sure if Scot bader are in leeds anymore

Locally your pretty SOL as far as the structural systems go

Huntsman do aradur ...get your wallet out though I use SP systems on the isle of wight i used to buy 25 litres at a time for about 230 quid, it goes a lot further than you think it does

[gavztheouch]

What ever happened to the guy who was going to test out a mix with 5 bags of quartz he was given?

[gavztheouch]

Not really an expoxy granite cast machine but still somewhat relevent and interesting

https://www.youtube.com/watch?v=9WPmIYosonI

A real diy EG machine

https://www.youtube.com/user/cawedog/videos

[magicniner]

the machine base is for engraving machine

In terms of recipe and process, it's not easy to say in short words

Use long ones then, we're moderately smart here ;-)

[JAZZCNC]

Use long ones then, we're moderately smart here ;-)

Very funny but you do realise he posted this 15mths ago. . . Lol