Quote Originally Posted by Flamered View Post
Thanks for the help!

I need a little clarification on some of your instructions. I have no clue about electrics apart from wiring up a plug!!
Please don't think I'm scare mongering here but I suggest you seek help from some one who does other wise you have large potential to get this wrong.!

Apart from the obvious danger to yourself from burning the house down if you completely get it wrong.!! . . .It's very possible you can damage the spindle or VFD if not correctly wired or careful attention to detail with wire connections.

Like my previous post says if you feel compelled to have an earth wire then in your case just take a wire from the spindle clamp bolt or any place that makes contact with the spindle body. Then take this wire back to the main Star Earth point in your control box.