. .

Thread: Y axis stalling

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 31-07-2013 #25
    richie00boy's Avatar
    Lives in Gloucester, United Kingdom.
    richie00boy
    Last Activity: 28-06-2015 Has been a member for 9-10 years. Has a total post count of 56. Received thanks 5 times, giving thanks to others 0 times.
    I'll have to strip the machine more to get at the leadnut - there is grease on it so I can't see what it's made of. I woudn't have thought it was excessively worn as it's only run about 10 hours.

    It does vibrate and stall.

    Is the current leadscrew threaded rod that I can buy easily and get the machinist at work to do the ends for me? I don't want to spend more than 50 quid really, but the primary use of the machine is PCBs so I need to get low backlash.
    Last edited by richie00boy; 31-07-2013 at 10:58 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. rough traversing and stalling only in main screen
    By davethefixer in forum Machine Discussion
    Replies: 4
    Last Post: 12-05-2013, 08:34 AM
  2. DPC spikes stalling stepper motors
    By Mad Professor in forum Stepper & Servo Motors
    Replies: 2
    Last Post: 23-10-2011, 10:21 AM
  3. Clicking sound from stepper motor & stalling
    By francooz in forum Stepper & Servo Motors
    Replies: 2
    Last Post: 06-02-2011, 04:15 PM
  4. X and Y axis stalling
    By francooz in forum Machine Discussion
    Replies: 11
    Last Post: 05-01-2011, 06:27 PM
  5. Missing Steps + Stalling X-axis
    By danielbriggs in forum Linear & Rotary Motion
    Replies: 5
    Last Post: 02-09-2010, 02:59 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules