. .

Thread: Y axis stalling

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-08-2013 #33
    richie00boy's Avatar
    Lives in Gloucester, United Kingdom.
    richie00boy
    Last Activity: 28-06-2015 Has been a member for 9-10 years. Has a total post count of 56. Received thanks 5 times, giving thanks to others 0 times.
    Just as a last check, here is a video of the leadscrew showing the runout. The leadnut housing has been unbolted from the gantry to show how it rocks due to the bent leadscrew. Hopefully you will agree that this is the cause of the problem.

    http://www.readresearch.co.uk/person.../leadscrew.mp4
    Last edited by richie00boy; 02-08-2013 at 02:45 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. rough traversing and stalling only in main screen
    By davethefixer in forum Machine Discussion
    Replies: 4
    Last Post: 12-05-2013, 08:34 AM
  2. DPC spikes stalling stepper motors
    By Mad Professor in forum Stepper & Servo Motors
    Replies: 2
    Last Post: 23-10-2011, 10:21 AM
  3. Clicking sound from stepper motor & stalling
    By francooz in forum Stepper & Servo Motors
    Replies: 2
    Last Post: 06-02-2011, 04:15 PM
  4. X and Y axis stalling
    By francooz in forum Machine Discussion
    Replies: 11
    Last Post: 05-01-2011, 06:27 PM
  5. Missing Steps + Stalling X-axis
    By danielbriggs in forum Linear & Rotary Motion
    Replies: 5
    Last Post: 02-09-2010, 02:59 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules