Hybrid View
-
31-08-2012 #1
The Journey begins
The Black Cat arrived to day, seems everything’s there, I got an old PC out of the loft to use. I was panicking because I remember there needing to be a LTP port serial port then I remembered that this came with one that plus into the a PCI slot.. pheww, then it turns out the old machine had a serial port after all .. bonus !
Luckily I’m working from home today and heard the 16 tonner , turbo charging up the hill of our street, because he was lost , they had given him the wrong address.. so after he had gone past twice I stood at the end of the driveway and sure enough he gunned it down the street and pulled over to ask me directions, I asked him who it was for, and that turned out to be me. Anyway after a tirade of expletives and generally bringing the parentage of his dispatcher into question, he got out of the cab, looked at his paperwork and said .. do you have a folk lift ? I said what the fook for ? he said it says here its 500 kgs.. I said it says Goodyear on my tyres, but it fooking hasn’t been..! so he drew back the curtains and I said it would have to be made out of plutonium to way that much.. he agreed and we humped of the wagon and into the shed.
As you can see I have added the workshop essentials.. lighting , power heat and loud music
My mate is a joiner and he has all the tools to build a work bench, luckily for me he lives next door :) I get him “films” and he helps me make stuff. So we will be building that next week. I hope to get the miller up and running before I start messing with the base plate.. after that I will make a Perspex box a. to stop cutting going everywhere and B. for my personal safety lol ..then I will make a sound proof box with all the speaker sound proofing materials I have for the compressor and vacuum pump. That’s as far forward I think….
-
31-08-2012 #2
-
31-08-2012 #3
Them Speakers look like B&W DM602S2's or possibly the earlier S1's?
-
31-08-2012 #4
Posh speakers for a workshop!
-
31-08-2012 #5
S1's I bought them at a car boot sale off some angry looking women who said they were her ex-husbands ..and didn’t work.. I got them home thinking.. What the hell could go wrong with them.. ? I mean speakers aren’t rocket science. And when I took out the post panels the crossover’s had been snipped! Guess he thought she would just give them back to him, but hey his loss my gain a bit of wire and solder and they were off and running.. I was going to set my daughter up with a system in her room with them, but she would just piss all the street off every night so I have them in the workshop.. Besides I like to hear good music .. the QED P300 and all the other stuff ..I was given because it wasn’t working.. most where simple fixes , I have an Arcam 350 in a box on the floor just needing a new toroid.. amazing the things people just give away lol
Both ;) he has crap broadband (BT) even though he lives on a cabled street .. go figure
-
05-09-2012 #6
Though I suppose this thread should be split between machines and workshop I'll post my tonights progreess .. not much but its getting there.. frames up should have the top and shelf on tomorrow night, going to coat it with marine varnish to try and cut down om mosture , though I think its a bit useless lol ..
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
-
06-09-2012 #7
Managed to get the top on and shelf in tonight , going to put a couple of coats of marine varnish on over the weekend. Measure up to deck the top with 4mm perspex.
Sorry about the double pics I uploaded the wrong ones first the 2nd set are the actual right size ..DDOH !
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
-
06-09-2012 #8
-
06-09-2012 #9
Lol Mark don’t think I have any mate.. I’m seriously thinking of shouting a week off and getting the damn thing up and running. But I do want to do it right and right from the start save me frustration later on.. i have other things on the go not a least an 18 year old daughter who as mad as a hatter lol
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
-
07-09-2012 #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Has anyone got/used a machine from Black-Cat-CNC?
By cjpwart in forum Milling Machines, Builds & ConversionsReplies: 11Last Post: 12-08-2012, 05:15 AM -
The cutting fun begins
By m.marino in forum Machine DiscussionReplies: 2Last Post: 01-04-2012, 12:35 AM -
NEW MEMBER: And so it begins
By compfranon in forum New Member IntroductionsReplies: 10Last Post: 27-03-2010, 11:58 AM -
BUILD LOG: The B&Q build adventure begins....
By flez1966 in forum DIY Router Build LogsReplies: 3Last Post: 11-10-2009, 01:48 AM -
eBay: 2GB USB Flash Memory, Swivel Stick (black)
By Lee Roberts in forum Items On eBay UKReplies: 1Last Post: 17-12-2008, 05:34 PM
Bookmarks