Hi all.

I have started to build my CNC control cabinet, I have come to wire the M542's to the Breakout Board, i have got myself confused again.
The Breakout Board has screw connections labelled XN, XD, XS & XE with Y & Z prefix as well, i understand that these represent each Axis.
The M542 is marked Pul+ (+5v) ~ Pul- (Pul) ~ Dir+ (=5v) ~ Dir- (Dir) ~ ENA+ (=5V) ~ ENA- (ENA) so 4 into 6 don't go, can anyone help with the correct wiring scheme please.

Regards

Ray