. .
  1. #1
    I worked for a company a few years ago that used spring loaded probes that could be placed in the spindle. They would "kick off" when the edge of the probe was touched on the work surface, be it fixture, work piece etc.

    It was perfect for setting up work offsets (G10s) and I imagine a damn sight cheaper than purchasing a light probe of some kind.

    Trouble is I cannot find anywhere to buy them. I am unsure of their product name so I cannot find anything online. They come in different types from ball, needle, long, short.

    Failing that I am interested in what others are using, obviously in the milling field.

  2. #2
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

  3. #3
    search ebay "centre finder"

    i use a camera mounted at the side of my spindle with an offset vb script to place the spindle where the camera was

  4. #4
    Thanks guys, exactly what I was looking for.

  5. #5
    There is also this for a more diy way:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. Probe Centering with Mach3 Tutorial
    By Ricardoco in forum Probing, Digitizing & Scaning
    Replies: 9
    Last Post: 02-07-2016, 07:19 PM
  3. Replies: 0
    Last Post: 13-11-2013, 07:50 PM
  4. Digitizing probes practicality
    By dudz in forum Probing, Digitizing & Scaning
    Replies: 2
    Last Post: 04-06-2013, 03:31 PM
  5. Co axial centering indicator
    By Robin Hewitt in forum Tool & Tooling Technology
    Replies: 13
    Last Post: 03-02-2012, 07:49 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts