Earthing?

[JAZZCNC]

Now't wrong with a bit of healthy obsession

Thin cable is fine and dandy if you were lighting a bulb or charging your iPhone with a bit of AC but this cable has more to do than that.

On the other end of it is a hefty inductive load, it may have tuned itself a bit to reduce the peak but sooner or later it is going to want to reverse the current in a coil winding PDQ. It will try to control that current using a chopper circuit which depends on measuring the current flowing some way away. Did you fit the optional braking resistors?

Fat, low resistance cable takes the strain off more expensive components.

Robin your talking shite again and confusing people with your ridiculous answers.!. . . If your not going to help people with relavant or helpful replys then why don't you STFU.!!

[Robin Hewitt]

Robin your talking shite again and confusing people with your ridiculous answers.!.

Hi Dean

I knew you would be along to explain why everyone seems hell bent on screening and tin boxes despite the problems they cause. This is something that has bothered me for some time, a trap I think I have fallen in to myself.

Ready when you are, I am all ears...

Robin

[JAZZCNC]

Hi Dean

I knew you would be along to explain why everyone seems hell bent on screening and tin boxes despite the problems they cause. This is something that has bothered me for some time, a trap I think I have fallen in to myself.

Ready when you are, I am all ears...

Robin

Not even going to get into it with you Robin because it's well documented why shielded cable is required. To say it's not needed is like saying this Gun may or may not have bullets put it to your head pull trigger to find out. .